# Pewter and Brass Examples

 Pewter and Brass I Pewter and Brass 01 Pewter and Brass II Pewter and Brass 02 Pewter and Brass III Pewter and Brass 03 Pewter and Brass IV Pewter and Brass 04 Points of Intersection Pewter and Brass 05 Microbial Invasion Pewter and Brass 06 Reflection at Dusk Pewter and Brass 07 Quadratic Formula Pewter and Brass 08 Infinite Series I Pewter and Brass 09 Elliptical Machine Pewter and Brass 10 Alternating Current Pewter and Brass 11 Infinite Series II Pewter and Brass 13 Door Number 2 Pewter and Brass 14

The Pewter and Brass examples apply a Circle Orbit Trap to a Newton Fractal based on the equation Carlson - Newton 2. The coloring is achieved by mapping the trapped point's angle into a gradient to select the color. Then the color is blended with a Perlin noise based pattern to give it a brushed metal quality.

## Zoom In/Out

Zoom In or Zoom Out to examine different parts of the fractal.

Execute the Home command on the View menu of the Fractal Window to reset the fractal to the default position/magnification, and then Zoom In to other areas.

Remember that as you Zoom In, you may need to increase the Max Dwell property found in the Orbit Trap Orbit Generation section of the General page.

## Play with the Fractal Equation's Properties

You can change the equation's properties for more variations.

Select the equation's properties page:

General
Mandelbrot / Julia / Newton
Fractal Equation: Carlson - Newton 2
Properties

Play with the equation's properties.

## Change the Julia Constant

You can generate other Julia Fractals based on the same equation.

Select the Fractal Equation:

General
Mandelbrot / Julia / Newton
Fractal Equation: Carlson - Newton 2

Uncheck the Julia checkbox, execute the Home command on the View menu of the Fractal Window to reset the Mandelbrot fractal to the default position/magnification, and use the Preview Julia command to explore the Mandelbrot's many different Julia Fractals. See Working with Julia Fractals for details.

Alternatively, you can change the Julia Constant property on the Fractal Equation page, and then click the Preview Fractal toolbar button on the Properties Window to generate a preview of your change in the Preview Window.

## Change the Fractal Equation

You can change the Fractal Equation used to generate the fractal.

Select the Fractal Equation:

General
Mandelbrot / Julia / Newton
Fractal Equation: Carlson - Newton 2

Change the Based On property to one of the following Fractal Equations:

• Newton 1
• Newton 2
• Newton 3
• Newton 4
• Newton 5
• Newton 6
• Newton 7
• Newton 8
• Newton 9
• Newton 10
• Newton 11
• Newton 12
• Carlson - Newton 1
• Carlson - Newton 2
• Carlson - Newton 3
• Newton Composite Function
• Newton Poly 4a
• Newton Poly 4b
• Newton Poly 4c
• Newton Poly 5a
• Newton Poly 5b
• Newton Poly 5c
• Newton Poly 5d
• Newton Poly 6a
• Newton Poly 6b
• Newton Poly 6c
• Newton Poly 7a
• Newton Poly 7b
• Newton Poly 7c

Then execute the Home command on the View menu of the Fractal Window to reset the Mandelbrot fractal to the default position/magnification, and use the Preview Julia command to explore the Mandelbrot's many different Julia Fractals. See Preview Julia Support for details.

Remember to navigate to the properties page for the equation (found under the equation in the page hierarchy) and play with the different properties found there. Many of the equations support properties that can be used to generate lots of different variations.

## Change the Orbit Trap

You can try out different Orbit Traps.

Select Instructions: Circle:

General
Mandelbrot / Julia / Newton
Orbit Trap
Orbit Trap Map
Instructions: Circle

Change the Based On property to one of the following Orbit Traps:

• Circle
• Line
• Polygon
• General Polygon
• Shape
• Sphere
• Patterned Sphere
• Solid Polygon
• Solid General Polygon
• Patterned Polygon
• Patterned General Polygon
• Epicycloid Polygon
• Hypocycloid Polygon
• Cross
• Crossed Lines
• Image
• Cassinian Curve
• Limacon
• Lemniscate
• Folium
• Cycloid of Ceva
• Circular Vine
• Celtic Knot
• Borromean Rings
• Tangent Circles
• Steiner Chain
• Rep-4 Tile
• Rep-4 Tile Patterned Polygon
• Rep-4 Tile Patterned General Polygon
• Rep-9 Tile
• Rep-9 Tile Patterned Polygon
• Rep-9 Tile Patterned General Polygon
• Polygon Motif
• Star of David
• Wheel
• Ornament
• Sectors
• Triangles
• Star Polygon
• Faceted Polygon
• Composite Shape
• Spiral
• Daisy
• Swirl
• Flower
• Rose
• Super Ellipse
• Shapes
• Squares

Each of these programs have properties (on the properties page found under the orbit trap) to manipulate the trap and thereby change the resulting fractal. There are several orbit traps not given in the above list since they are stand-alone fractals or are too complex to display in this context.

You can also try out the different optimized orbit traps. To do this, select Orbit Trap Map:

Change the Type property to one of the following:

Each of these orbit traps have properties (on the page found under the Orbit Trap Map page) to manipulate the trap and thereby change the resulting fractal.

## Change the Transformation

You can apply a transformation to the initial orbit point, or to each orbit point prior to passing it to the orbit trap.

Execute the Home command on the View menu of the Fractal Window to reset the fractal to the default position/magnification before you adjust the transformation. Then change the transformation and Zoom In to interesting areas of the transformed image.

To change the transformation applied to the initial orbit point, select the transformation's properties page:

General
Mandelbrot / Julia / Newton
Transformation
Composite Function
Properties

Set the F(z) property to one of the complex functions in the list. You can change some of the other properties on this page for more variations.

You can also use a different transformation altogether. Select the Composite Function page, and change the Based On property to select a transformation and then open the transformation's properties page (found under the transformation in the page hierarchy), and play with the transformation's properties. See Transformation Support for details.

Click the New toolbar button to add a new Identity transformation to the bottom of the list, and then click the Move Up toolbar button to move the new transformation to the desired position in the list. Normally, I move the new transformation to the top of the list, but it can be placed anywhere. See Transformation Array for details.

Then select the Identity transformation:

Change the Based On property to select a transformation and then open the transformation's properties page (found under the transformation in the page hierarchy), and play with the transformation's properties. See Transformation Support for details.

To change the transformation applied to each orbit point prior to passing it to the orbit trap, select the transformation's properties page:

General
Mandelbrot / Julia / Newton
Orbit Trap
Transformation 1
Composite Function
Properties

Set the F(z) property to one of the complex functions in the list. You can change some of the other properties on this page for more variations.

You can also use a different transformation altogether. Select the Composite Function page, and change the Based On property to select a transformation and then open the transformation's properties page (found under the transformation in the page hierarchy), and play with the transformation's properties. See Transformation Support for details.

## Play with Color

To play with color, select the color controller's properties page:

General
Mandelbrot / Julia / Newton
Orbit Trap
Controllers